The paint surface is weatherproof, scratch-resistant, and abrasion-resistant, as well as being resistant to most oils. Good adhesion, high coverage, easy processing.Lacquer for wood, furniture, wooden doors, wooden windows, wooden fences, wooden cabinets, wooden tables, wooden chairs, wooden facades, wooden beams, garden furniture and...
Paint for Basement, floor, balcony, terrace and cement Degree of gloss: silk gloss | Processing: rollers and brushes Ideal for concrete, plaster, eternite, cement screed and also for wood Made in Germany stands for quality | Approved by the building authorities | TÜV tested...
TÜV tested / Made in Germany / open to diffusion Easy processing with a roller, brush or spray device High coverage / good adhesion / permanently elastic Long range = approx. 5m2 / liter / professional container EN-certified Weather-resistant / UV-resistant / water and...
The paint surface is weatherproof, scratch-resistant, and abrasion-resistant, as well as being resistant to most oils. Good adhesion, high coverage, easy processing.
Lacquer for wood, furniture, wooden doors, wooden windows, wooden fences, wooden cabinets, wooden tables, wooden chairs, wooden facades, wooden beams, garden furniture and much more.
Ideal for renovation or repainting. The paint can be applied using a brush, roller or (airless) sprayer.
Can be used as a wood protection paint, wood cover paint, cover paint, furniture paint, dispersion paint, weather protection paint or wood cover paint.
Wooden surfaces should be protected from harmful environmental influences. Our wood varnish protects wood products indoors and outdoors, serves as a weather protection and wood care agent. The wood protection paint protects against UV radiation, heat, cold, frost, hail, rain, wind, soot and much more.
Keep out of the reach of children / Wear protective gloves and protective clothing / After skin contact: Wash with plenty of soap and water / If skin irritation or rash occurs: Get medical advice / get medical attention / Dispose of contents / container to hazardous waste
This product complies with the requirements of directives 2004/42 / EC and 2010/79 / EU
on limiting the VOC content.
KNOWN FROM
WOLFGRUBEN WERKE
Quality and experience for your projects
For over 20 years, Wolfgruben Werke has stood for high-quality paints, varnishes, and coatings “Made in Germany.” With more than 500,000 satisfied customers, we are among the leading providers of professional coating systems for indoor and outdoor use. Our products are distinguished by their durability, high coverage, and excellent application properties. Many solutions are also certified by the Institute for Consumer Protection, guaranteeing the highest safety and quality for your projects. Whether floor coating, roof paint, wood varnish, or bathtub coating – with us you’ll find tested brand quality you can rely on.
EVERYTHING FROM A SINGLE SOURCE
Paints, varnishes, and coatings from the professionals
Our wide range includes paints, varnishes, epoxy resin coatings, and matching accessories for renovations, refurbishments, and creative projects. As a top online retailer in 2025 with a rating of 4.9 out of 5 stars, Wolfgruben Werke offers you expert advice and comprehensive customer service. We deliver your order quickly and free of shipping costs within Germany so you can start your project without delay. Thanks to our many years of experience, German manufacturing, and recognition from TV, radio, and trade magazines, we stand for quality and reliability – by professionals for professionals and demanding DIY enthusiasts.
FAQ
Our customer service is available from Monday to Friday from 9:00 AM to 6:00 PM.
Optimal processing conditions are between 15 - 25°C and a relative humidity of 30 - 60%.
High temperatures and low humidity shorten the drying time, while low temperatures and high humidity extend the drying time.
Do not process in direct sunlight to avoid too rapid drying of the paint and the formation of bubbles on the surface.
Do not paint when it is windy to prevent dust from settling on the surface before it dries.
Optimal processing conditions are between 15 - 25°C and a relative humidity of 30 - 60%.
High temperatures and low humidity shorten the drying time, while low temperatures and high humidity extend the drying time.
Do not process in direct sunlight to avoid too rapid drying of the paint and the formation of bubbles on the surface.
Do not paint when it is windy to prevent dust from settling on the surface before it dries.
Which tool is the right one?
For water-based paints, acrylic varnishes: flock roller or a short-pile lambskin roller, brush with synthetic or artificial fiber bristles
For solvent-based paints and varnishes: short-pile rollers (for example Vestan rollers) that do not trap air, natural bristle also called China bristle
For floor coating: lint-free paint roller
For facades: masonry brush, also called painter’s brush, or a simple paint roller
For PU varnish: paint rollers made of mohair, pile, velour, smooth felt, Royal, Rolloplan. Foam rollers are unsuitable!
For water-based paints, acrylic varnishes: flock roller or a short-pile lambskin roller, brush with synthetic or artificial fiber bristles
For solvent-based paints and varnishes: short-pile rollers (for example Vestan rollers) that do not trap air, natural bristle also called China bristle
For floor coating: lint-free paint roller
For facades: masonry brush, also called painter’s brush, or a simple paint roller
For PU varnish: paint rollers made of mohair, pile, velour, smooth felt, Royal, Rolloplan. Foam rollers are unsuitable!
How do you clean tools?
It depends on the materials you have worked with:
If it was a water-based product – you can manage with water
If it was solvent-based – use a universal thinner
Cleaning tools contaminated with epoxy resins is a bit more complicated. You should always weigh up cost vs. benefit:
Cleaning brushes, rollers, mixing cups, etc., is not worth it. The cost of cleaning agents is already significantly higher than using new tools. For simple tools, it is better to let them harden and use new ones.
When cleaning expensive tools, you should keep in mind that work equipment must never be cleaned with solvents or thinners. Even the smallest traces of solvents on the tools can prevent the epoxy resin from curing in your next project. In this case, all your work would be in vain.
It depends on the materials you have worked with:
If it was a water-based product – you can manage with water
If it was solvent-based – use a universal thinner
Cleaning tools contaminated with epoxy resins is a bit more complicated. You should always weigh up cost vs. benefit:
Cleaning brushes, rollers, mixing cups, etc., is not worth it. The cost of cleaning agents is already significantly higher than using new tools. For simple tools, it is better to let them harden and use new ones.
When cleaning expensive tools, you should keep in mind that work equipment must never be cleaned with solvents or thinners. Even the smallest traces of solvents on the tools can prevent the epoxy resin from curing in your next project. In this case, all your work would be in vain.
Why is the paint or oil not drying?
Possible reasons:
At temperatures below +15°C / above +25°C and humidity over 70%, the drying time is extended
A thick layer of paint takes longer to dry
Products such as cleaners or degreasers can slow down the drying time
Both components of the epoxy paint are poorly mixed or incorrectly distributed
Possible reasons:
At temperatures below +15°C / above +25°C and humidity over 70%, the drying time is extended
A thick layer of paint takes longer to dry
Products such as cleaners or degreasers can slow down the drying time
Both components of the epoxy paint are poorly mixed or incorrectly distributed
The surface is still sticky after a few days of drying. What can I do?
Possible reasons: If the paint was applied thickly or the excess oil was not removed from the surface, the wood may remain sticky.
What to do: You can use a soda lye with warm water or sand the surface mechanically and then reapply the paint or oil.
Possible reasons: If the paint was applied thickly or the excess oil was not removed from the surface, the wood may remain sticky.
What to do: You can use a soda lye with warm water or sand the surface mechanically and then reapply the paint or oil.
Es ist noch etwas dunkler als mein Foto ,das Regal war vorher türkis
K
Katharina
Immer 2 Schichten auf das Holz, was nicht sauber ist. Sonst sehr gute Denkkraft
Sehr gute Qualität und einfache Farbe zu streichen!Habe viel Holz damit gestrichen und würde sie immer wieder kaufen 👍
R
Rebecca Ramgraber
Nicht deckend
Hatte die Farbe Reinweiß schon im Juli bestellt, aber jetzt erst aufgemacht. Die Farbe ist leider überhaupt nicht deckend, habe sie zuvor mindestens 15 Minuten mit dem Akkuschrauber umgerührt. Selbst bei mehreren Anstrichen sieht man noch den Untergrund durch. Leider kann ich deswegen keine gute Bewertung abgeben.Nachtrag: Sehr guter Kundenservice, dieser hat sich bei mir gemeldet und mir angeboten, dass ich mein Geld erstattet bekomme oder eine neue Farbe. Ich habe mich für die Farbe entschieden, und mir wurden sogar 10 Liter (also doppelt soviel Farbe wie ursprünglich bestellt) geschickt und die Farbe wurde zuvor vom Hersteller auf die Deckkraft getestet. Bin sehr zufrieden, vielen Dank.
M
Maria Blome
Holzfarbe
Die Farbe ist leicht zu verarbeiten und deckt super gut ab
Anschreiben Kundenbewertung für das ProduktErst mal vielen Dank an den Verkäufer !Ich hatte bereits im März diesen Jahres 5 l von dieser Farbe käuflich erworben, nun nochmal im Juli, da ich fast 60 m Gartenzaun restauriert hatte und es mit dieser Farbe verschönert habe. Die Juli – Lieferung war, obwohl gleiche RAL-Nummer vom Farbton gering heller als die aus der Märzlieferung, dies konnte ich nicht zu einer öffentlichen Straße hin den Passanten anbieten, die hätten sich Todgelacht, grins.Ich habe es dem Verkäufer mitgeteilt der sofort freundlichst geantwortet hatte, mir sogar gleiche Menge als Kulanz angeboten hatte, damit ich die 60 m Zaun neu überstreichen kann, war voll nett vom Verkäufer. Nun aber zur Qualität und Verarbeitung der Farbe.Die Farbe ist sehr gut streichfähig, man kann mit langen Pinselstrichen sehr gut auftragen. Da ich das Holz bis auf den Grund von der alten Farbe abgeschliffen hatte, war die Deckung nicht gleich gegeben, ich musste 2 mal überstreichen. Sehr gut ist hierbei, dass die Farbe sofort angenommen wird vom Untergrund, man sogar gleich nach wenigen Minuten, da sie sofort gut angetrocknet, nachstreichen kann, super.Weiterhin sehr positiv ist, wenn man Farbe im Behälter hat, setzt diese sich meist nach Tagen auf den Grund ab, diese Farbe nicht, es ist eine Konsistenz, welche ohne Rumrühren sogar nach Tagen einsatzbereit ist.Danke an den Verkäufer nochmals, gebe positive Kaufempfehlung.
The paint surface is weatherproof, scratch-resistant, and abrasion-resistant, as well as being resistant to most oils. Good adhesion, high coverage, easy processing.Lacquer for wood, furniture, wooden doors, wooden windows, wooden fences, wooden cabinets, wooden tables, wooden chairs, wooden facades, wooden beams, garden furniture and...
Paint for Basement, floor, balcony, terrace and cement Degree of gloss: silk gloss | Processing: rollers and brushes Ideal for concrete, plaster, eternite, cement screed and also for wood Made in Germany stands for quality | Approved by the building authorities | TÜV tested...
TÜV tested / Made in Germany / open to diffusion Easy processing with a roller, brush or spray device High coverage / good adhesion / permanently elastic Long range = approx. 5m2 / liter / professional container EN-certified Weather-resistant / UV-resistant / water and...
