2-Pack Epoxy Resin Mortar Grout Paving Joint Concrete Repair Mortar W757 - 5-20Kg
- 49,90€
- 49,90€
- Unit price
- 9,98€ per kg incl. VAT
Already thought about the right accessories?
-
Pre-cleaner for Concrete Garage Pool Substrate Preparation surface Before Painting Cleansing Effect W810 5-10L
22,90€
-
Acid Etching surface Preparation for better adhesion of W700 Floor coating paint for concrete and for W702 2-Pack Epoxy Resin Floor Coating Paint Garage Concrete W800 - 10L
29,90€
-
Floor leveling compound Smooth Level surface Preparation Coverings Cementitious mixture Mortar Grout W715 - 25Kg
79,90€
-
2-Pack Epoxy Resin Floor Coating Paint Garage Concrete W702 2,5-20Kg
54,90€49,90€ -
Floor coating paint for concrete and cement W700 1-20L
22,90€19,90€ -
2-Pack Epoxy Resin Floor Sealer Floor Concrete Clear/Colorless W734 1,5-20Kg
34,90€
Description
- For repairs to concrete floors and screeds prior to coating work, repairing holes, for forming coves, concrete restoration.
- 2-Pack repair mortar for concrete repairs - epoxy resin mortar for industrial use
- Epoxy mortar for repair works on screed, concrete and asphalt
- Quick repair of concrete pavements, floors, precast concrete elements, etc.
- Frost-proof and waterproof / high chemical resistance
Product data
2-Pack Epoxy Resin Mortar
Epoxy mortar for repair work on screed, concrete and asphalt, e.g. renovation of worn-out industrial floors, closing of floor cracks, garnishing of joint edges, repair of stair treads, level compensation on doorsteps and ramps.The special properties of the epoxy resin make the mortar resistant to oils, greases, de-icing salt, acids and alkalis. The epoxy resin mortar is also suitable as a leveling layer on uneven surfaces.Product advantages:
Mix epoxy resin-mortar mixture:
The components resin (A) + hardener (B) are supplied in a appropriate mixing ratio. Pour the hardener completely into the resin component and mix thoroughly with a mechanical stirrer at a maximum of 400 rpm until the mixture is homogeneous (approx. 5 minutes). After mixing, transfer to a clean vessel and stir again thoroughly. The temperature of the components should be at least 8 °C. Add the homogeneously mixed resin/hardener mixture to the filler component (quartz sand) (C) and mix with a mechanical stirrer at a maximum of 300 rpm (approx. 5 min until a homogeneous mixture is achieved).Technical specifications:
Drying:mechanically resilient after 1-2 daysConsumption:depending on the application and extent of the repair area
Processing temperature min. 6-8°C - max. 30°C
Das Set besteht aus:Resin + hardener + quartz sand
Mixing proportions:
Product information
Our mortar is self-priming and bonds to almost all solid substrates or adjacent coverings. Is ideal for chipping, holes and voids in concrete and screed floors. Due to the chemical composition, the material hardens almost without shrinkage.
Hazard statements
2-Pack Epoxy Resin Mortar (Component A)
The product complies with the requirements of EU Directive 2004/42/EC on the limitation of VOC content.
2-Pack Epoxy Resin Mortar (Component B)
Causes severe eye damage
Keep out of reach of children / Wear protective gloves / protective clothing / eye protection / face protection / In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse / In case of skin irritation or rash: seek medical advice / seek medical attention / If eye irritation persists: seek medical advice / seek medical attention / Dispose of contents / container to an appropriate recycling or disposal facility.
The product complies with the requirements of EU Directive 2004/42/EC on the limitation of VOC content.
